Description
Lian Li Lancool 215w Tempered Glass White Atx Case | LIAN-LI-215W
Lian Li LanCool 215W Tempered Glass White ATX Computer Case Model G99.LAN215W.00
(2 x200mm 800 RPM ARGB fans, 1x120mm 1000RPM fan)
Unobstructed Airflow
LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.
Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.
OPTIMIZED THERMAL MANAGEMENT
MESH INTAKES SPANNING THE FRONT PANEL GUARANTEE SUFFICIENT AIRFLOW IN AND OUT OF THE SYSTEM.
INCLUDED FANS
Pre-installed fans ensure the case runs at peak performance.
MULTI COOLING
SYSTEMS SUPPORT
Supports a maximum of 7 fans and radiators
in various sizes and configurations. You make the call!
Front Panel
(interior) 3 x 120MM fans
2 x 140MM fans
280MM radiator with max 70MM thick
360MM radiator with max 70MM thick
Top Panel 2 x 120MM fans
2 x 140MM fans
240MM radiator with max 55MM thick
280MM radiator with max 55MM thick
Bottom Panel
(on top of the PSU shroud) 2 x 120MM fans
ULTIMATE COOLING SYSTEM SCENARIO
With two 200MM fans mounted outside of the frame,you still have enough room to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario.
Dont worry about the fan screws, they wont interfere with the radiator.
OPTIMIZED THERMAL MANAGEMENT
MOVE AIR STYLISHLY WITH ARGB EFFECTS
Two 200MM fans are equipped with LED lights which create a dazzling effect through the mesh panel.
EXPERIENCE ARGB CONTROL VIA ONE BUTTON
The LED button located on the top controls 8 lighting modes and 7 colors through a simple click.
HIGHLIGHTED LOGO
The LIAN LI logo glows in sync with the fans
ARGB SYNCHRONIZATION WITH THE MOTHERBOARD
Pressing the LED button 3 seconds passes over the control of the LED lights to the motherboard, and press the button 3 seconds again to regain control of the lights.
PLENTY OF SPACE FOR CABLE MANAGEMENT
The 22MM thick space behind the motherboard ensures the cables fit in well.
PRE-INSTALLED FAN HUB
The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.
KEEP THE CABLE NICE AND NEAT
The rubber grommets around the motherboard and the cable tie points at the back of the motherboard tray, with included Velcro straps, simplify cable management.
STORAGE & MOTHERBOARD SUPPORT
ROOM FOR 4 STORAGE DRIVES
REMOVABLE/ADJUSTABLE CAGE SUPPORTS
2 X 3.5 HDD OR 1 X 3.5 HDD + 1 X 2.5 SSD
2 X SSD SUPPORT BEHIND THE MOTHERBOARD
E-ATX MOTHERBOARD COMPATIBLE
Fits motherboards with a maximum width of 280MM.
SIMPLE DUST MANAGEMENT
The trendy mesh design at the front panel provides filtration for dust coming from outside the chassis.
Moreover, the magnetic dust filter on the top and the removable full-length dust tray
at the bottom protect the internal components from dust accumulation without impeding the airflow.
Dimensions (D) 462mm x (W) 215mm x (H) 482mm
Motherboard E-ATX(width: under 280mm)/ATX/M-ATX/ITX
PSU 210mm
Materials
Steel
4.0mm tempered glass
Incl Fans 2 x 200MM 3-PIN 800 RPM ARGB fans (front)
1 X 120MM 3-PIN 1100 RPM Fans (rear)
Fan Support Front: 2 x 140mm or 3 x 120mm
Top: 2 x 120mm or 2 x 140mm
Top of PSU chamber: 2 x 120mm
Radiator Front: 1 x 280/360mm
Top: 1 x 240 / 280 mm
VGA Length 370mm
CPU Clearance 166mm
Drive Behind MB Tray: 2 x 2.5? SSD
Hard Drive Cage: 2 x 3.5? HDD or 1 x 2.5? SSD
Slot 7
I/O Ports Power button
Reset button
LED button for lighting mode control
1 x HD AUDIO
2 x USB 3.0
Dust Filters 1 x Top (magnetic), 1 x Bottom (tray)
